Polars Platform
Published in

Polars Platform

Polars Beta-testing (Stage 1)

In order to get access to Polars Pre-sale, you need to take part in the beta-testing of the platform. It will take no more than 30 minutes.

Beta testing of the Polars platform consists of 3 stages:

Stage 1. Introduction to the Polars platform (Formerly STEP 0–5)

Stage 2. Trading competition

Stage 3. Completion. Evaluation of results.

This article will focus on Stage 1. You have to go through 5 steps + the preparatory STEP 0. As a rule, Stage 1 takes no more than 15 minutes of your time.

Attention! You should be added to the testers whitelist. To do this, go to the official Polars chat, click on the attached message and click on the testers whitelist link. Click start and enter all the required data.

Important! You only need to use the Metamask wallet. No other wallets are available for testing the Polars platform on the Ethereum Rinkeby network.

If you are an advanced DEFI user and are fluent in this area, we recommend that you familiarize yourself with the shortlist of necessary actions, which will be right under this paragraph. But if you feel insecure, we recommend that you read the detailed instructions with screencasts, which will be even lower.

Stage 1 (Shortlist)

This section is text. There are no screenshots in it. Detailed instructions here.

STEP 0

  1. Go to your Metamask, Click the network selection in the application header and Choose RInkeby Test Network.
  2. Go to the official Rinkeby Faucet website https://faucet.rinkeby.io/, Post your tweet with your ethereum address, and Choose 7.5 Ethers / 1 day. Test Ethers will be sent to your Metamask. (It is very important to choose exactly 7.5 Ethers) Then you can delete the tweet.
  3. Go to your Metamask and click “Add token”, Choose a Custom Token, Insert token address: 0xa6cc591f2fd8784dd789de34ae7307d223ca3ddc and the TUSDC token has been added to your Metamask.
  4. Go to Uniswap https://app.uniswap.org/#/swap, Select the TUSDC token. (If Uniswap does not find the TUSDC token in the list, then click Manage Token Lists, select Token and insert the TUSDC address. You will be able to add it to the list). Enter the amount of 6001 TUSDC and SWAP. (Uniswap now has a specific bug after launching V3. Entering 6001 TUSDC will show you an insufficient balance error. To solve this problem, enter a value in the ETH field and the opportunity to perform SWAP will appear). If you are using the mobile version — please use the browser in metamask (It is very important to buy exactly 6001 TUSDC.)
  5. Go to the etherscan through your metamask activity tab and save transaction hash of your 6001 TUSDC SWAP. (We recommend that you save it in the dialog saved messages in the telegram. From there it will be convenient to transfer it to the bot at the last step) .Thank you, Step 0 is finished.

Now You have TUSDC. You can use them in the next testing step (Step 1). Please note that you must have exactly 6,001 TUSDC on your wallet. Expect the following instructions as soon as possible.

BALANCES STEP 0

STEP 1

  1. In your Metamask click “Add token”, Choose a Custom Token, Insert token address: 0x2F744fb5af6Face11204763f7b419EE34692132F and the BWT token has been added to your Metamask.
  2. If you are from a mobile phone, use the metamask browser.
    Go to Polars Platform https://app.polars.io/, and Press CONNECT WALLET. Connect your Metamask with Polars Platform.
  3. Choose BASE POOL >>> TAKE LIQUIDITY. Give 2000 TUSDC and take BWT tokens of this amount. Go to the etherscan through your metamask activity tab and save transaction hash of taking liquidity (We recommend that you save it in the dialog saved messages in the telegram. From there it will be convenient to transfer it to the bot at the last step).
    Attention! In order to take the TAKE LIQUIDITY action, you first need to complete the APPROVE transaction. Only after this transaction can you make a TAKE LIQUIDITY transaction. Thank you, Step 1 is finished.

Important! After all the operations, you should have approximately 4000 TUSDC and 2000 BWT left. You will need them in the next step.

BALANCES STEP 1

STEP 2

  1. In your Metamask click “Add token”, Choose a Custom Token, Insert token address: 0x87Af9175D8275830F8d9C3aF9a141FB270AfD4Be and the BWLT token will be added to your Metamask.
  2. In your Metamask click “Add token”, Choose a Custom Token, Insert token address: 0x6b68102f22f5551b19ea703e861e4b90611ccc0d and the WHITE token will be added to your Metamask.
  3. In your Metamask click “Add token”, Choose a Custom Token, Insert token address: 0x5ab81da6c8dc30b80910517f039788174e41c19c and the BLACK token will be added to your Metamask.
  4. Choose EARN >>> LIQUID POOL >>> ADD LIQUIDITY. ADD 2000 BWT tokens and TAKE BWLT on this amount. Go to the etherscan through your metamask activity tab and save transaction hash of adding liquidity (We recommend that you save it in the dialog saved messages in the telegram. From there it will be convenient to transfer it to the bot at the last step).
    Attention! In order to take the ADD LIQUIDITY action, you first need to complete the APPROVE transaction. Only after this transaction can you make ADD LIQUIDITY transactions. Thank you, Step 2 is finished.

Important! After all the operations, you should have 4000 TUSDC and some BWLT left. You will need them in the next step.

BALANCES STEP 2

STEP 3

  1. Choose TRADE >>> LIQUID POOL. BUY 400 WHITE. Go to the etherscan through your metamask activity tab and save transaction hash of this swap. (We recommend that you save it in the dialog saved messages in the telegram. From there it will be convenient to transfer it to the bot at the last step). Attention! In order to take the SWAP action, you first need to complete the APPROVE transaction. Only after this transaction can you make the SWAP transactions.
  2. BUY 400 BLACK. Go to the etherscan through your metamask activity tab and save transaction hash of this swap. (We recommend that you save it in the dialog saved messages in the telegram. From there it will be convenient to transfer it to the bot at the last step). Thank you, Step 3 is finished.

Important! After all the operations, you should have about 3600 TUSDC, 400 WHITE, 400 BLACK and some BWLT left. You will need them in the next step.

BALANCES STEP 3

STEP 4

  1. In your Metamask click “Add token”, Choose a Custom Token, Insert token address: 0x337ba9b5fbca4bed10ebe63c6305727521e4edda and the PTPT token will be added to your Metamask.
  2. Choose EARN >>> TRADE POOL >>> ADD LIQUIDITY. Insert 50 TUSDC and the correct WHITE and BLACK values will be filled in automatically. Approve WHITE, then Approve BLACK, then Approve TUSDC. Then ADD WHITE/BLACK/(50)TUSDC tokens to the Trade Pool (insert 50 TUSDC) and you will receive some PTPT. (Attention! When you make this transaction, put the GAS Price (GWEY) — 5, and GAS LIMIT — 200,000). Attention! In order to take the ADD LIQUIDITY action, you first need to complete 3 APPROVE transactions. Only after this transaction can you make ADD LIQUIDITY transactions.
  3. Go to the etherscan through your metamask activity tab and save transaction hash of adding liquidity. (We recommend that you save it in the dialog saved messages in the telegram. From there it will be convenient to transfer it to the bot at the last step). Thank you, Step 4 is finished.
BALANCES STEP 4

STEP 5

  1. In your Metamask click “Add token”, Choose a Custom Token, Insert token address: 0xB1fC2cDD72FECCeCadB852632c0FBa00ac4F81AB, Press edit Token Symbol and insert: POL, and the POL token will be added to your Metamask. Note that originally the name of this token is TEST_REWARD_TOKEN. You need to click edit, and enter the POL yourself manually.
  2. Choose FARMING >>> START FARMING. Choose manage BWLT and ADD all BWLT tokens to FARM. (Please use only integer values, no decimals. For example 1980 BWLT (but not 1980.321828491). When you make this transaction, put the GAS Price (GWEY) — 5, and GAS LIMIT — 200,000). Attention! In order to take the DEPOSIT action, you first need to complete the APPROVE transaction. Only after this transaction can you make the DEPOSIT transactions.
  3. Choose manage PTPT and ADD all PTPT tokens to FARM. (Please use only integer values, no decimals. For example 60 BWLT (but not 60.321828491). When you make this transaction, put the GAS Price (GWEY) — 5, and GAS LIMIT — 200,000). Attention! In order to take the DEPOSIT action, you first need to complete the APPROVE transaction. Only after this transaction can you make the DEPOSIT transactions.
  4. Go to the etherscan through your metamask activity tab and save transaction hash of BWLT DEPOSIT and PTPT DEPOSIT. (We recommend that you save it in the dialog saved messages in the telegram).
  5. Go to this telegram post, find and click STAGE 1 TELEGRAM BOT.
    STEP BY STEP Insert saved hash of 8 transactions: (1)6000 TUSDC SWAP, (2)TAKE 2000 BWT, (3)ADD 2000 BWT, (4)BUY 400 WHITE, (5)BUY 400 BLACK, (6)ADD LIQUIDITY TO TRADE POOL, (7)DEPOSIT BWLT, (8)DEPOSIT PTPT. Thank you, Step 5 is finished and STAGE 1 is FINISHED. ( Additional link to bot: tg://resolve?domain=polars_io_bot&start=ml15). Please use only this bot to complete Stage 1. Don’t go to @polars_io_bot, it won’t work. Only this link: tg://resolve?domain=polars_io_bot&start=ml15.

After you have completed STAGE 1, you can participate in STAGE 2 (Trading Competition). STAGE 2 hasn’t started yet, but we’ll be launching it in the coming days. Wait for updates.

BALANCES STAGE 1

Video (Stage 1)

VIDEO STAGE 1

Polars

The new DeFi platform for creating secure polar tokens, the price of which depends on the results of specific external events. Within the POLARS platform, users can buy, sell and exchange polar tokens, as well as participate in the distribution of the platform’s commission income.

Telegram Chat

Telegram Channel

Twitter

Youtube

Website

--

--

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store