ReadWrite
Published in

ReadWrite

Wired Security Cameras — Protect From Hacking

It’s essential to keep all security devices secure and out of the reach of thieves. Homeowners who have security cameras installed in their homes need to be aware that other problems can cause the cameras. Wired security cameras can be hacked, but it is less common for wireless cameras. While it’s possible to hack into the software or hardware of a wired camera, it is much harder to access. We’ll find out if it’s possible.

Can Wired Security Cameras Be Hacked?

It is not impossible to hack a wired security camera, even if they are more secure than a wireless system. However, to hack your system, it is necessary to have actual physical access to the camera to crack the encryption. This is usually done through access to the system router or the recorder you are relying on. The router or the recorder is where the system receives the footage.

There are also some ways to protect your wired camera.

If you’re looking for a state-of-the-art wired camera that is very difficult to hack, take a look at the Anke 8CH on Amazon. It’s GDPR compliant, and you can wire it inside or outdoors.

Many people still believe that security cameras can’t be hacked, but it doesn’t take long to find that those people were either hacked by someone they trusted or just wanted to get a better look at them.

Using a wired camera is much safer than a wireless version

To use a wired camera is much safer than a wireless version — so keep that in mind. The purpose of this article is to make you aware that a wired camera can be hacked, but it is harder to do so — and less likely.

Security cameras that can be accessed through the Internet or mobile devices are a significantly larger problem if you don’t want anyone seeing your activities.

Automated tools will make your system secure and less easy to access. Make your automated authentication secure in the prescribed way (don’t use grandma’s phone number). Automated tools will help stop any hackers from breaking your authentication.

What do you do if your security cameras are not accessible over the Internet?

Security cameras that use wifi connections can be accessed by hackers from anywhere in the world and can also be used to spy on unsuspecting neighbors.

To ensure that hackers do not compromise your DVR or camera, regularly update your DVR or camera firmware. To make your home safer and more secure, you need to find a device to prevent and detect intrusions.

Some manufacturers of CCTV systems later released a patch for their systems to remove the exploit, so many homeowners who were using this vulnerable hardware were no longer. You can explore the best CCTV Cameras prices in Bangladesh.

Has your wired security camera been hacked?

It’s not simple to determine if your system is secure, nor is it easy to tell if your camera system has been hacked. So please keep track of your settings and ensure they haven’t been changed or accessed by a third party.

Here are some of the most frequently used questions and checks:

1. Unable to Access Your System

It is essential to monitor your network and the information flowing through it. Unable to access your wireless gives you an early warning of potential threats to your network. If you have put in strong creds and passwords and the camera is still not working — your camera or system may have been hacked or disabled.

Physical causes should be ruled out before trying other ways to fix the problem. Like an update to the system can cause this problem — which is fine — you just need to unplug and reset your system.

2. The settings have been changed.

Camera owners who use their cameras regularly should look for any changes in settings, unexpected behavior by their security system, and access by other people to see if it is they who were.

It would help if you were sure to look around your home or business and rule out anyone else changing these settings.

Also, make sure you’re not buying a new system by upgrading an old system. Often, firmware upgrades can switch a few settings here and there. That’s not a problem, but usually, an upgrade won’t bother your system.

3. Abnormal movement can happen.

Suppose the security camera position changed. It may be worthwhile to check it to see any abnormalities on the camera itself. Once installed, your camera should always retain the same view. If you see your camera view switching around, or you see a different view than the one you set up — you can be fairly sure that you have been hacked.

A compromised security camera will reveal information about you, your family, and your residence.

Do an Internet search on your surveillance system every few months for safety.

It’s very easy to know whether your security camera systems have been hacked, but the first step is to do an Internet search on your surveillance system. It is much easier to hack into a DVR than a regular TV or cable box because the only way to connect the DVR is through the network.

How will you keep your security cameras safe?

Wi-Fi-enabled security cameras are easier to secure than wired ones because there are a limited number of ways a hacker could be able to access them.

You’re probably wondering how you can secure your digital camera. Here are a few things to check for before buying and setting up a camera.

1. Update Firmware

We update Firmware on everything we own — don’t skip the firmware update on your camera — it is essential for keeping the hardware of the security camera in good working order. In addition, many camera manufacturers release regular updates for their products — when they do, it is an opportunity to check your system.

We can’t guarantee that every reported security vulnerability or flaw will be addressed, but this is the best way to ensure that issue.

2. Remote access should be restricted.

If you need to access your home remotely, you may want to access it from all of your devices. For example, it may be good to only access your system from one computer or phone instead of multiple points, which will have a better chance of hacking your system.

Even if a small number of employees have access to data — such as an IT manager — the company needs to ensure that anyone with a computer or smartphone cannot monitor other spaces. Watch who has access to your office, home, and surroundings.

To prevent someone from gaining access to your security camera, be sure to set up your authentication page before accessing the system. Setting up an authentication method first defends against potential thieves looking for easy grabs.

3. Passwords have to be strong.

People often think that authentication pages are useless, but they are essential. Don’t use words like “hello” or “I’m cool.
How many times do people have to have these instructions before they listen? Having a strong password is like saying, “look both ways before you cross the street.” Those who do not listen to this advice will one day be hit by a car.

And, you will one day be hacked if you don’t have a good, strong password according to the instructions that are always given to you. So, please heed the advice about strong passwords.

The username-password used to access your website is easily hacked by your local or global hackers. Keep in mind that hackers run automated scans of security pages and authentication pages. So don’t be tempted to go the easy way when your family and security are at stake. Instead, use two-factor authentication for any of your camera access points — like your computer and phone.

If there is no rate limit to log-in failures, there is a chance that your device will be hacked. Of course, it’s a total pain if you forget your code — but it’s better to have to keep your information in a safe than to have your safety breached.

Stronger passwords with a mix of upper and lower case characters, numbers, and symbols will help ensure that hackers cannot access your accounts.

4. Set up two-factor security

It’s a bit of a rare thing to see two-factor authentication used in the case of wired devices, but it’s a great way to secure your camera if you can turn it on. Our two-factor on our cameras is easy. From my phone, I access the system; then, when asked for the two-factor, I move to a phone app (an app like “authy” — but there are many selections). That app gives me a one-time, changeable code — back to the previous page, enter the number. Easy-peasy.

It is recommended to have two-factor authentication enabled for all security-conscious websites, but you can do this on your phone too.

You can use a stronger password if your camera doesn’t have two-step verification. And that should be enough to deter most thieves.

5. The Router needs to be secured.

It’s possible to hack into routers and any internet-accessible device, such as a computer or smartphone.

The hacking points are your gateways to access the Internet, and you must keep a security posture with your Internet. If their security posture isn’t maintained, they could also provide access to your camera.

For example, if a hacker can hack a router and gain access to the internal network — they might be able to access the camera just as you do.

To ensure that your network is secure, you must do some security checks such as strong passwords and two-factor authentication.

FAQ about security cameras being hacked.

Here are a few answers to camera security questions.

1. Is it safe to use wired security cameras?

Security cameras that are wired are more secure and reliable than wireless cameras. These cameras are less vulnerable to hackers if you set up the security correctly, in the first place and then check your security to make sure it’s in place. Your wired cameras are not the recording device, so you will want to keep an eye on your DVR and maintain its safety. The camera DVR system can be compromised by being jammed, a disabling attack, or remote hacking.

To stay safe, implement safety by keeping your equipment safe and in a secure location in your home or office, and remember to use your strong passwords and authentications. Even though physical attacks can disable wired cameras — remote hacking is the preferred method by hackers. Remember that these hackers can still be countered by strong authentication.

2. Is it possible that all security cameras can be hacked?

It’s possible to hack all security cameras, wired or wireless. Wireless security cameras are more accessible to hacking due to their network availability, but wired cameras are often configured to access the Internet. As a result, criminals might be able to record footage and monitor your surroundings if your security device is hacked.

If you want to prevent hacking attempts from hackers, ensure you have strong passwords and two-factor authentication.

3. Is it possible to jam the wired CCTV cameras?

As security cameras transmit footage to the DVR, they can be difficult to jam. For example, if the transmission cables are damaged, the camera might be unable to record. On the other hand, wireless cameras are easy to jam because they use the same radio frequencies as the camera itself.

The wires that connect the camera to the recorder should not be visible — make sure they are hidden in the wall. Keeping wires out of the way will make them less prone to being jammed or fiddled with. If a security camera fails to record after a specific time, the camera will alert authorities or homeowners.

Nowadays, hacking a wired security camera is not a rare occurrence. Even security devices need their own security to be protected against illegal attempts. Take care of your camera so it will take care of you.

We explored security cameras in this article, which are the same as before. Do your wired cameras have security? A sound security check is the only thing that can answer this.

Conclusion

Wired security cameras are one of the safest ways to watch your home or business. In the past, hackers have been able to hack into a wireless camera and steal all the data stored. However, they haven’t yet been able to hack in and steal the data from a wired camera.

Image Credit: Provided by the Author; Thank you!

Oliul Islam

Wired Security Cameras — Protect From Hacking was originally published on ReadWrite on June 20, 2022 by Oliul Islam

--

--

--

ReadWrite is the leading media platform dedicated to IoT and the Connected World. We work with the industry's top technologies, thinkers, and companies to tell the stories that drive this world forward.

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
ReadWrite

ReadWrite

The latest #news, analysis, and conversation on the #InternetOfThings

More from Medium

Zero Trust — The Silver Lining to Cloud Cyber Attacks

Osaka Digital Exchange to launch PTS operations on June 27

Future of Insurtech: Automation and trends including web3

Time to Lock Down Your Digital Privacy