Sony A7RII / A7RIII / A7III Thin Filter Mod ~~The ultimate way For Sony Cameras using Leica M lenses
Six years Long Term review + update FAQ and content revision massive pictures
中文版本 Chinese Ver…
Preface
Why remove the low pass (OLPF) / change the Thin filter?
The middle layer should be the moire removal filter
The red reflective outer layer is the UV/IR Cut filter
This time the original filter was replaced
All three pieces together are about 1.8mm thick
This problem may be a problem for many people who still have many RF wide-angle lenses leftover from the negative era and would like to see them revived on digital cameras. However, as side RF lenses not designed for digital optimisation, many RF lenses have a very short rear lens distance, very close to CMOS. The CMOS front filter is too thick, and the angle of incidence of the wide-angle lens is too large, resulting in a collapse of the image quality at the edge of the final image.
“In short, although the BSI technology has helped…