Azure Routing and Peering Basics
Azure architects must aware of fundamentals of routing and peering. In this article we will see fundamentals as well as we will see some examples of routing and peering of networks in Azure.
Well before directly jumping in peering you must have your routing components fundamental cleared. Lets talk the very basic thing first Subnet then we will tackle routing and peering.
What is Subnet in Azure?
We know VNet gives isolation or a private network boundary in Azure for the resources within your VNet. Similarly within the VNet if you want further boundary among resources then you can create subnets and put required resources within subnets.
A subnet is a range of IP addresses in the VNet. You can divide a VNet into multiple subnets for organization and security. You can create subnets to create a logical boundary within VNet. You can think of creating subnets for Web Tier, Business Tier, Data Tier services and VMs.
By default resources among subnets can communicate without any extra configuration for a given VNet. If you want to restrict some traffic to a specific subnet within VNet then you can add NSG.
🏆 Pro Tip
Since subnet size can’t be changed after assignment, use a subnet that’s large enough to accommodate whatever scale your app might reach. To avoid any issues with subnet capacity, you should use a /26 with 64 addresses.
How VMs in subnet communicate with other Subnet VMs?
Each NIC in a VM is connected to one subnet in one VNet.
NICs connected to subnets (same or different) within a VNet can communicate with each other without any extra configuration.
System Routes in Subnet
System routes are created by Azure when you create subnet. You can not create, modify or delete system routes. You can only overwrite them by creating custom routes (BGP policy routes or User defined routes).
Every subnet has a route table that contains the following minimum routes:
LocalVNet Route for local addresses (no next-hop value)
On-Premises Route for defined on-premises address space (VNet gateway is next hop address)
Internet Route for all traffic destined to the Internet (Internet Gateway is the next-hop address)
- If address is within the VNet address prefix — route to
- If the address is within the on-premises address prefixes or BGP published routes (BGP or Local Site Network (LSN) for S2S) — route to gateway
- If destination is an Azure datacenter address and ER (ExpressRoute) public peering is enabled — it is routed to the gateway.
- If the address is not part of the VNet or the BGP or LSN (Local Site Network) routes — route to internet via NAT If the destination is an Azure datacenter with S2S or an ER without public peering enabled, it is routed to the Host NAT for internet path, but it never leaves the datacenter.
User Defined Route ( UDR )
You can create custom, or user-defined(static), routes in Azure to override Azure’s default system routes, or to add additional routes to a subnet’s route table.
Each route contains an address prefix and next hop type. When traffic leaving a subnet is sent to an IP address within the address prefix of a route, the route that contains the prefix is the route Azure uses.
Whenever a virtual network is created, Azure automatically creates the following default system routes for each subnet within the virtual network:
Source Address prefixes Next hop type Default Unique to the virtual network Virtual network Default 0.0.0.0/0 Internet Default 10.0.0.0/8 None Default 192.168.0.0/16 None Default 100.64.0.0/10 None
Possible Next hop from subnets are:
- Virtual Network: routes traffic between address ranges within the address space of a virtual network. Azure does not create default routes for subnet address ranges. You don’t need to define gateways for Azure to route traffic between subnets. Azure automatically routes traffic between subnets using the routes created for each address range.
- Internet: Routes traffic specified by the address prefix to the Internet. The system default route specifies the 0.0.0.0/0 address prefix.
- None : Traffic routed to the None next hop type is dropped, rather than routed outside the subnet.
Virtual network peering enables you to seamlessly connect two or more Virtual Networks in Azure. Azure supports the following types of peering:
- Virtual network peering: Connect virtual networks within the same Azure region.
- Global virtual network peering: Connecting virtual networks across Azure regions.
Gateways and on-premises connectivity
Peer Virtual Network can communicate to on-premise either by using its own gateway or it can use hub and spoke network topology where one VNet called
Hub will have VPN Gateway that will be connected to on-premise. Rest of the VNet will use
Allow Gateway Transit and that way they will use the
Hub VNet gateway. This kind of peer VNet is called as Spoke they use remote gateway to talk to on-premise.
You can create peering between VNets from same/different subscriptions.
A Network Interface (NIC) enables an Azure Virtual Machine to communicate with internet, Azure, and on-premises resources. When creating a virtual machine using the Azure portal, the portal creates one network interface with default settings for you.
Thanks for reading my article till end. I hope you learned something special today. If you enjoyed this article then please share to your friends and if you have suggestions or thoughts to share with me then please write in the comment box.