Why My Blink Camera Flashing Red | Blink Camera CuStoMer SeRvIce Phone ☎️Number

Are you a little worried because of your Blink Camera Flashing Red? Just like you, there are many other users who are also facing this red light error. When the red light starts blinking inside the camera, it stops recording.

Hence, you would need to fix this issue if you want to make your Blink camera start working again. In this guide, I am going to mention all the steps that will fix the red blinking error on your security camera.

So, start repeating all the steps in the same given order. Before the end of this guide, the Blink Camera Not Working issue will be fixed in a very short possible time.

Blink Camera Flashing Red, Why?

The red light on the Blink camera means that your camera is no more connected to the internet. Hence, in other words, it can be said that Blink Camera Blinking Red light means that there is something wrong with the network connection.

But, you don’t have to be worried because I am going to mention all the troubleshooting methods to make your camera start working again.

How Do I Fix When Blink Camera Blinking Red?

Here are the steps that you should follow when a Blink Camera Not Working Red Light issue occurs.

1. Your Internet Should Be Working Perfectly: If your Blink Camera Not Recording properly, you should check your internet connection. It may be possible that your wifi is down currently or someone has changed the password.
2. Update The Password: If you have found that someone has changed the password then you would need to update it from the Blink camera application. After updating the app, check whether the issue gets resolved or still the security camera flashing red light.
3. Blink Camera Setup: Another reason when the Blink security camera blinks red is the time when you complete the Blink Camera Setup. But, this light will turn into the green light once the connection is set up completely.
4. Reset Your Device: If you have tried all the methods but still Blink Camera Flashing Red then reset your device now. To do so, press the reset button given on the device with the help of a thin object. Wait until the camera will restart again.
5. Check The Batteries: Don’t forget to check the batteries inside the camera. There are chances the inserted batteries are damaged or need to be positioned correctly. So, turn off the back cover and inspect as mentioned.
6. Minimize The Distance Between This is another possible reason that could be responsible why your Blink Camera Connected but Not Working. You may have positioned the security camera too far from the router. This is the reason why it is showing a flashing red light.
7. Restart The Modem/Router: This old-school method often works with many technical problems and I believe that you should apply this here too. Turn off the router and then take out the power plug from the wall outlet. Remove all the other cables too that are connected at the back of the router. Wait for at least 30 seconds to 1 minute and then reconnect all the cables again. After doing that so, turn ON the router and let it connect to the Blink security camera.
8. Restart The Camera: After restarting the router if you have found that your Blink Camera Flashing Red, In this condition try to restart the security camera. To restart the camera, turn off the power plug and then remove all the cables connected to the Blink camera. After waiting for a while, reconnect the cables and then turn On the Blink camera again.

Conclusion

There are several reasons that could be majorly responsible for why your Blink Camera Flashing Red. Sometimes, the camera flashing red light because of a weak internet connection, while other times too much distance between the router and the camera could be the major problem. But, from now you won’t have to be worried as I have mentioned all the troubleshooting steps in this guide.