Jumping out of window with a TV cable
MacGyver yanks a TV cable from the wall and ties it around him. Then boom-he’s out of the second story window to catch a bad guy. As he falls, the cable gets pulled from the wall and sort of prevents him from a full force impact with the ground.
Electrostatic dust print lifter
Electrostatic dust print lifters are indeed real. Here is an example of a real one.
The basic idea is to take a conducting sheet and lay it on top of the area where you want to find a print (finger print or shoe print). When a large electric field is applied, the dust literally gets lifted and stuck to the conducting sheet. Boom. There is your print. Oh, you need about 800 volts to get a high enough electric field (according to one paper that is no longer online for some reason).
For the MacGyver version, he uses some mylar for the sheet. In order to create the large electric field, he can use the charging capacitor for the flash in a disposable camera. That might not get up to 800 volts, but it’s a good start. Yes, it’s also true that you can get fairly high voltages just by rubbing two different materials together-as long as the air is dry. This is exactly what happens when you rub your feet across a carpeted floor and then shock the bejeezus out of someone. Same idea.
One more thing. The official version of the electrostatic dust print lifter is pretty expensive. But someone made one for just 50 dollars using a stun gun. Here is the hackaday.com link, but it looks like the original post has link rotted.
Just to show you some more electrostatic stuff-here are some demos that you could try.
Open an envelope with steam from a radiator
Yup, this works.
WiFi wall detector
OK, it doesn’t detect walls. Instead, the wifi can find empty spaces behind walls. MacGyver takes a wifi router with a partially parabolic dish (using aluminum foil) over the antenna. He then connects the output to a speaker (for a cool effect).
Yes, wifi is essentially a radio wave (it is a radio wave). Radio waves mostly pass through walls-but you have wifi in your house and you know that sometimes you don’t get a great signal. This shows that wifi is at least partially blocked by walls. The wifi can also reflect off stuff.
It is this reflected wifi that MacGyver uses to find the hidden room. When there is nothing on the back side of a wall, you don’t get a good reflected signal and that changes the sound of the connected speaker.
OK, this probably wouldn’t work-but it’s still based on this idea that wifi can interact with walls in different ways. Anyway, MIT has created a tool to use wifi to see through walls. Note, this show came out before that. I’m not saying MIT based that wifi thing on this episodes. I’m just sayin.
Movie film roll for distracting fire
MacGyver takes one of those movie film rolls. Adds some stuff and then lights it on fire. When he rolls it down to the front of the movie theater-boom. Distracting explosion. Yeah, lots of stuff burns. No problem here.
Originally published at http://rhettallain.com on February 9, 2019.