TryHackMe — Internal Walkthrough

Aniket Badami
Dec 31, 2020 · 16 min read

This is practical walkthrough of Internal Penetration Testing Challenge on TryHackMe. There are already several walkthroughs are available of the aforementioned challenge on the Internet, however this will be little bit different as I am going to explain the behind the scenes as well as reasons behind using specific technique to accomplish the goal.

Passwords and Flags will be redacted to encourage you to solve those challenges on your own.

Goal of this challenge is to find and acquire user.txt and root.txt flag.

First Things First
Deploy the target machine (this machine might take upto 3–5 minutes to load and accessible)
There are two ways to access the deployed target machine.
1) Use attacker box — Provided by TryHackMe, it consist of all the required tools available for attacking.
2) Use OpenVpn configuration file to connect your machine (kali linux) to their network.
For the sake of demonstration I am using OpenVPN connection on my machine (macOS) and THM (attacker machine)

We have to append internal.thm and point it to target machines IP address inside hosts file on attacker machine.

We won't be using Metasploit for this challenge

Initially we will start with modifying the hosts file.

All of my further commands will be executed as normal user not as root. So, if you’re also not executing all the commands as root then make sure to use sudo, as it can give you permission to change system configuration.

Use any of your favorite text editor to modify hosts file.

Image for post
Image for post

Reason 1 to edit hosts file: As you probably already know, if you make any type of request to any hostname, the domain name gets translated to an IP address. In TCP/IP, only the IP address is transferred and not the hostname. In services such as HTTP(S), you also transfer the hostname in the “Host” HTTP header. If you visit a website through the URL with IP address in it, the Host header will contain the IP address. If you visit the URL with the hostname in it, the Host header will contain that hostname. Then it depends on the web server how it will process the request based on that header. In TLS handshake, you can also send the hostname in the “server_name” extension. So if the underlying back-end services only respond to the hostname, the easiest solution to send it natively is to modify your hosts file. The software that you use (e.g. a web browser) will do the rest. Credits: u/AMDcze (reddit).

Reason 2: One IP address can host multiple websites on same webserver through virtual hosting (vhost) technique. If by any chance the target server has any multiple websites then it would be hard to figure out which is which. By pointing DNS in hosts file you are actually saying your apps to target only the specific domain.

Reason 3: What if there are any subdomains? How to enumerate them without domain itself? While enumerating you have to expect that there’s a possibility of subdomain, so that you need domain itself. You can enumerate subdomain through an IP address.


Let’s start our enumeration with Nmap. In this section we will start to find ports, services and its version.

Nmap flags: -F (Fast scan, top 100 ports), -sV (Service Version scan) and -Pn (no ping scan).

Honestly I use fast scan most of the time, as it can produce result in minimum time. Once I have initial ports, I keep enumerating them from different tab and in parallel I perform full port scan. The reason behind this is, full port scan take more time to finish.

Image for post
Nmap Result

Target has two open ports 22 and 80 with service version information. If we do a little quick version vulnerability check on exploit-db, then there are none. The present version of Apache is 2.4.46 and present OpenSSH version is 8.4. When we compare the present version of both ports with the result then its pretty obvious that it’s not very old version and that might be the reason there are no public exploits are available based on version.

If we visit the web server then we get the below result. It’s just a default page of Apache which is running on Ubuntu.

Image for post
web page

Let’s Enumerate HTTP further using GoBuster. Gobuster is a tool used to brute-force URIs, DNS, Vhosts and S3 buckets.

Image for post

We are using GoBuster for specific reason and that would be to find directories on hxxp://internal.thm. We are hoping to find any login pages.

Image for post
Gobuster result

As you can see from above on going process, it already found a directory that is /blog. If we visit hxxp://internal.thm/blog then we see a blog with one single post named as “Hello World”.

Image for post
Default Blog
Image for post
Blog Post

It’s obvious now that this is designed using WordPress application. We have a user called “admin”, who posted this blog.

Let’s find out the version of this WordPress application. We can do this without any tools (passive). Right click on blog page and click on “Show Page Source

Image for post

Within a site’s source code and on certain hidden pages, you may be able to find the version number. To do that press “ctrl + f and type ver” (ver is short of version)

Image for post

As you can see the red circle, it’s version number for wordpress. That is 5.4.2. If we do a quick version vulnerability check on exploit-db then there are none.

If we look at the blog then you can see log in option in the blog. If we click on that than it can redirect to login page of wordpress.

Image for post
Login Option
Image for post
Login Window

As of this moment we don’t know the username and password. However, we can able to enumerate usernames through different techniques.

WordPress Username Enumeration

Technique 1: Look at the post on blog

Image for post
User of blog

Technique 2: In a default installation you should be able to find the users of a site by iterating through the user id’s and appending them to the sites URL. For example /?author=1, adding 2 then 3 etc.

Image for post
User ID
Image for post
User of Blog
Image for post
Image for post

As you can see, I tried /?author 1 and 2, both time results varied.

Technique 3: Enumerate Users through Guessing

Image for post
Username guessing

We get an error, but this error is informative. As it says “password for admin is incorrect”. That means, there is a user named “admin”.

Image for post
Username guessing

I tried some other user name, and the error is “username unknown”.

Technique 3: Using WPscan application

WPScan is a free, for non-commercial use, black box WordPress security scanner written for security professionals and blog maintainers to test the security of their WordPress websites.

Image for post
WPScan Command

Using above command we are going to scan the blog for security vulnerabilities as well as username enumeration (-e u).

After the result we are interested in two things one is outdated theme which is being used and username. This outdated theme might come in handy as we go along.

Image for post
Outdated Theme
Image for post
Username Enumeration

Without any critical vulnerability we can get in, so we have to somehow get the login credentials. This is possible using Bruteforce technique.

WPScan also Bruteforce usernames and passwords, this is an aggressive technique. Might generate lot of logs and events on server side. As this is a testing box, we don’t need to worry about logs.

Image for post

We already know the username, so we provide “admin” and for password we use “RockYou.txt” for wordlist attack.

Image for post
Password Found

Now we have username and password for WordPress Login.

Image for post
Admin Panel

We got in, what’s next? We already know that a specific theme is outdated, let’s visit that using theme editor. Go to appearance and click “theme editor”.

Image for post
Theme Editor

There are some theme files. Where we can update our theme accordingly. There are also some PHP files.

Image for post

We can use PHP to get the reverse shell using php-reverse-shell payload of Pentestmonkey (hxxps:// Either you can download on your machine or if you are using Kali Linux, it’s already there. We have to edit it to add our attacker machine IP address and port address. We are doing this because, after this .php file execution it gives us a reverse shell on specified IP address and port.

Image for post
PHP reverse shell

Change $ip and $port to your machines IP and Port. Note: it’s okay if you want to go with the default port.

Image for post
Change IP and Port
Image for post
Modified IP and Port

Now copy all the content of php-reverse-shell.php file and go to the theme editor of WordPress and click on “404 Template

Image for post
Theme Template

Remove everything from that file and paste the copied content and click on “update file

So, we are going to execute a custom php script on server and upon execution we get a reverse shell on our attacker machine. Once we have reverse shell, then we can further move towards our goal to get “user.txt” and “root.txt” flags

On your machine (Kali Linux) set up a listener to receive incoming connection from target machine. To do that we are going to use NetCat (nc).

Netcat is a computer networking utility for reading from and writing to network connections using TCP or UDP. The command is designed to be a dependable back-end that can be used directly or easily driven by other programs and scripts. -Wikipedia

Image for post
Netcat Listener

-l (Listen mode, for inbound connects)
-v (verbose)
-n (Suppress name/port resolutions)
-p (Specify local port for remote connects)

So, we are almost set to receive remote connection from target machine. Only one thing is left to do, that is to execute that 404.php file. To do that, we first need to find where that file is.

Most of the theme are located inside /wp-content/ and theme related contents are inside /wp-content/themes/. So, our theme name is twenty seventeen, that means the file will be inside /wp-content/themes/twentyseventeen/404.php

Let’s visit the 404.php from url using hxxp://internal.thm/blog/wp-content/themes/twentyseventeen/404.php

Image for post
Reverse Shell

Now we have a reverse shell on our machine (kali linux). Let’s move around and find out who’s the user of this machine.

Image for post

There is one user named “aubreanna”. If you try to enter then it gives you error, thats because we don’t have permission to access that folder.

Image for post

At this moment we can try a lot of things to escalate our privileges to take fully control over machine.

Privilege Escalation — User

Now we have initial access over target machine, but it’s not enough to retrive user.txt and root.txt flags. So, we have to gain higher level of access through either a vulnerability/misconfiguration.

Initially we will go with LinPeas (Linux Privilege Escalation) script. ( One of the best script to find privilege escalation paths.

We have to upload file to target machine. Again, there are many ways to do this. I am going to use “updog” application to host my files for access. (use the power of internet how to install updog, it’s pretty easy)

Image for post
Upload LinPeas

Once its available to access, now we use “wget” command to download the specific file to a temporary folder (/tmp)

Image for post
Wget Command

Now move to tmp folder and check it.

Image for post

we have the file and now we need to execute that file using below command
$ bash

It gives you a lot things on screen. But, follow the color code as they have mentioned in their blog.

RED/YELLOW: 95% a PE vector

RED: You must take a look at it

LightCyan: Users with console

Blue: Users without console & mounted devs

Green: Common things (users, groups, SUID/SGID, mounts, .sh scripts, cronjobs)

LightMangeta: Your username

It’s literally a haystack, so we need to concentrate on RED/Yellow stuff.

There are some things which came to my attention.

We have wordpress configuration.

Image for post
Wordpress configuration

SSH root login (only works if we have root password)

Image for post

phpmyadmin configuration

Image for post

Let’s check the phpmyadmin configuration for any infomration.

Image for post
phpmyadmin folder

One specific file has interesting information.

Image for post

phpmyadmin username and password to access. If you go back to gobuster’s result then we can see that there’s a “phpmyadmin” page.

Image for post
gobuster phpmyadmin

If we visit it then we can see there’s a login page to access.

Image for post
phpmyadmin login page

This would give us access to database with the credential which we got from config-db.php file, but it would not help use to escalate privileges.

Let’s move around the filesystem and find out is there anything interesting. It’s really hard to find out without a specific goal in mind. Whenever I get a initial access to linux machine, I usually execute locate command to find specific files or folders. Most of the CTF boxs flags are stored in text file (.txt). Let’s start there and then move accordingly.

Image for post

So, there nothing much to get by that command. Let’s do a wildcard search using the same command.

$ locate *.txt

The result data will be huge. It takes time to find what we are looking for. But fortunately just after executing that command we got an interesting folder with interesting file.

Image for post
Interesting Folder

If we look into that file then we see credentials are user “aubreanna”.

Image for post

So, now we can login into “aubreanna” user with these credentials. To login we can either ssh into her account or use “su” command to login directly.

if we try to use “su” command then it gives us an error.

Image for post
su error

The reason behind this error is, when we Netcat (nc) and gets a reverse shell then these shell are not fully interactive TTY, these are not bash or zsh shell.

You can check which shell you are using by below command

Image for post

There are limitations for /bin/sh

Some commands, like su and ssh require a proper terminal to run

STDERR usually isn’t displayed

Can’t properly use text editors like vim

No tab-complete

No up arrow history

No job control and ETC

So, lets upgrade it to proper bash. Most linux OS have python installed so we can use python pty module. The pty module let’s you spawn a psuedo-terminal that can fool commands like su into thinking they are being executed in a proper terminal.

Image for post
Python pty

Let’s check again now which shell we are using

Image for post

Let’s login using su -l command and input the password

Image for post
su -l
Image for post
local user

Now we are inside local user, let’s find the user.txt flag.

Image for post
user.txt flag

Privilege Escalation — Root

We already got user.txt flag, now we move to retrieve root.txt by escalating current user privileges to root. At this stage we can again try the same “LinPeas” script to find some vulnerability to escalate, but it’s a dead end. However, in “aubreanna” home folder there’s a Jenkins.txt file.

Image for post

The file consist text saying it’s running on specific IP and Port on localhost. But the IP address is different than out deployed machine, if we check ifconfig result then we get the clear idea.

Image for post

As you can see, there’s a docker running on target machine with 172 series IP address, so Jenkins is inside docker running on port 8080. Even if we try to access that docker IP and Port using our browser it’s not reachable. So, to access it we are going to use SSH tunneling technique to forward Jenkins ip:port to our attacker machine’s ip:port. We have exit all the logins and reverseshell. From attackers (kali linux) terminal execute below command and type the password which we retrieved from wp-save.txt file.

Image for post
ssh tunnel

To access Jenkins, type localhost:6767 in your browser to access it.

Image for post
jenkins login

We need credentials to access Jenkins. Even if we try the regular passwords like admin:admin or admin:password, it won’t work. We have to bruteforce this using some tools like Hydra.

Hydra is a parallelized login cracker which supports numerous protocols to attack. It is very fast and flexible, and new modules are easy to add. This tool makes it possible for researchers and security consultants to show how easy it would be to gain unauthorized access to a system remotely.

We also need BurpSuite to collect some variables of HTTP GET/POST request.

Image for post

Note: Due to some weird reasons I couldn't able to crack using THM attacker machine. I deployed my on kali machine on vm and then it worked.

Now we have Jenkins password. Use it login and click on “manage jenkins” and find “script console”.

Jenkins has lovely Groovy script console that permits anyone to run arbitrary Groovy scripts inside the Jenkins master runtime. Groovy is a very powerful language which offers the ability to do practically anything Java can do.

So, we use this groovy script console to run our java reverse shell. Before you execute java reverse shell make sure to run netcat (nc -lvnp 4444) on your attacker machine (kali linux)

Image for post
Groovy Script Console

Once you input the java reverse shell code (change the IP and port) and click on run button to execute our code on target server.

Image for post
reverse shell

Spawn bash using /bin/bash -i command

Image for post

Now we are in docker environment not actual target server. Some of the commands will not work in docker environment, for example locate command which we used last time to find any text files with credentials. So, this time we use another command.

Image for post

After executing the command, the first item is /opt/note.txt. Previously we found wp-save.txt in /opt too. Let’s check what is in that text file.

Image for post

The message is from Aubreanna and left root credentials. Using these root credentials we can ssh into target machine.

Image for post

Once we are in, we look for our last flag, root.txt

Image for post

Now we have both flags, user.txt and root.txt

Thank you for reading this blog. While attempting this challenge I learned so many things. This was unique target with unique vulnerability.


The Startup

Medium's largest active publication, followed by +773K people. Follow to join our community.

Medium is an open platform where 170 million readers come to find insightful and dynamic thinking. Here, expert and undiscovered voices alike dive into the heart of any topic and bring new ideas to the surface. Learn more

Follow the writers, publications, and topics that matter to you, and you’ll see them on your homepage and in your inbox. Explore

If you have a story to tell, knowledge to share, or a perspective to offer — welcome home. It’s easy and free to post your thinking on any topic. Write on Medium

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store