First Text Message Sent By Molecular Communication 

Forget carrier pigeons or mobile phones, Canadian researchers have worked out how to send text messages using chemical spray

The Physics arXiv Blog
The Physics arXiv Blog
4 min readOct 7, 2013

--

While humans have exploited everything from carrier pigeon to smoke signals to send information, most modern forms of communication rely on electronic signals.

And yet, there are many circumstances when electronic signals aren’t appropriate or simply don’t work. Through liquid, for example, or over very short distances or anywhere that lacks the electronic infrastructure necessary to transmit, send and receive electronic signals.

Nature has solved this problem with molecular communication. Our cells communicate with each other using chemicals such as neurotransmitters and hormones to carry information. While other animals and insects use pheromones to communicate over much larger distances.

In recent years, bioengineers have begun to study how molecular communication works. But despite all this theoretical work, nobody has got round to actually sending messages in this way.

Today, all that changes thanks to the work of Nariman Farsad at York University in Toronto, and a couple of pals. These guys have built a table-top communication system that transmits and receives short text messages encoded in the form of airborne chemicals.

The first message to be transmitted over the chemical airwaves will bring a tear to the eye of many a Canuck. Being patriotic chaps, Farsad and co’s first message is “O Canada”, the title of the Canadian national anthem.

(Continued below…)

The set-up is relatively simple. Any communication system must have a transmitter, a receiver and a propagation channel along which the data is sent.

In this case, the transmitter is an electronically-controlled liquid spray gun filled with isopropanol, more commonly known as rubbing alcohol or surgical spirit. The receiver is an electronic alcohol sensor capable of detecting the chemical signals in the air. And the channel is simply the air between the two, the flow aided by a fan placed behind the transmitter.

Encoding the text is also straightforward. To keep things simple, Farsad and pals opted for a simple binary code in which they represent letters using five bit sequences. So the letter “A” is the five bit sequence is 11000, for example. They don’t bother with error correction at this early stage.

They then use a 100 millisecond squirt of alcohol to represent a ‘1’ and no spray to represent a ‘0’. Each message begins with a 10 which allows the receiver to determine the length of a bit and so calibrates each message as it starts.

Communicating in this way is something of a black art. When the sensor senses the alcohol, it produces an electronic signal that reflects the change in concentration. Farsad and co built a simple algorithm that interprets this response signal as ‘1’. However, the system then has to reset itself to receive the next signal, which may be a 1 or 0.

Both the response time and reset time are important factors in the communication protocol. If the chemical signals come too quickly, the sensor can’t distinguish them. If they are sent too slowly, a single 0 can look like 00. So there is a sweet spot at which the communication is optimal.

After various experiments, Farsad and co settled on a distance of 4 metres between transmitter and receiver which allowed them a data rate of 1 bit every 3 seconds. “Using this scheme, we are able to successfully transfer the test phrase “O CANADA” (the name of the national anthem of Canada) from the transmitter to the receiver,” they say, with more than a little pride.

That’s an impressive result. These guys have produced a cheap and easy-to-build molecular communication system that anybody could knock up in their garden shed. It allows simple, reproducible experiments with this new form of communication for the first time.

It also reveals an interesting property of molecular communication that could turn out to be important. These guys show how the flow of information along this communication channel is non-linear. So while the data is sent uniformly from the transmitter, it doesn’t arrive at the receiver in this way.

That may be the result of turbulence in the air or irregularities in the spray or some other reason—Farsad and co aren’t sure. But if it turns out to be a general feature of molecular communication, it’ll be a significant discovery.

That’s because all the theories developed to describe molecular communication so far assume that this flow is linear; nonlinearity may require a significant rewrite of communication theory.

More importantly, Canada now has its own phrase to enter into the history books. A quick Google search reveals that Samuel Morse’s first words over the telegraph were “What hath God wrought?”. Alexander Graham Bell’s first words on the telephone were “Mr. Watson — Come here — I want to see you”.

In future, interested readers will find O CANADA in this vaulted position when they look up the history of molecular communication.

Ref: arxiv.org/abs/1310.0070: Table-Top Molecular Communication: Text Messages Through Chemical Signals

--

--