How to Setup TP-Link Kasa Devices to Apple HomeKit?
Have you ever wondered how to add TP-Link Kasa smart devices to Apple HomeKit? Then this is a right for you. I have found the best ways to add TP-Link Kasa home devices to Apple Home App. You can add your TP-Link Kasa devices to HomeKit using a third-party HomeKit bridge.
In this article, I will explain the best solutions to control TP-Link Kasa home devices with your Apple Home App that don’t require any technical knowledge.
AddtoHomeKit — Best Recommended Solution
If you need to add your TP-Link Kasa devices to Apple HomeKit, I suggest the AddtoHomeKit is the best solution to it with my experience. Because if you use this, you have very few steps to follow when adding devices to HomeKit through AddtoHomeKit.
AddtoHomeKit is desktop software, and it is very easy to use. It is less time-consuming, low on effort, perfect for you, especially if you have a busy lifestyle. If you want to connect Switch Bot Smart Devices to Apple HomeKit, Click via the button below.
Steps to integrate TP-Link to HomeKit using AddtoHomeKit
- Visit the AddtoHomeKit official page.
- Click “Activation”.
- Enter your email.
- Follow the instructions given in the email sent.
- Select which smart devices you need to add to HomeKit.
- Once you are redirected to the next page select the preferred solution.
- Now select the operating system and click install.
- Then, Follow the on-screen instructions as mentioned.
Athom Bridge — Recommended Device Solution
If you are specifically searching for a device solution, I would recommend you get Athom Bridge. Because it is an affordable and simple device solution to integrate your TP-Link Kasa devices to Apple HomeKit. This is a specially assembled and pre-flashed Home Bridge server.
If you plan to use Athom Bridge the only thing you need to do is download the plugins and configure them add boom its done.
HOOBS (HomeBridge Out of the Box)
HOOBS is another solution to add smart home devices to Apple Home App. It is a user-friendly, compatible platform. It simply indicates setting up the process and operating HomeBridge.
HOOBS is a bit complicated. But if you have a little bit of coding knowledge it should be manageable.
Steps to integrate TP-Link to HomeKit using HOOBS
- Prepare Your Network.
- Visit the HOOBS website (hoobs.org) to download the HOOBS image.
- Boot Up HOOBS.
- Access HOOBS Dashboard.
- Access HOOBS Configuration.
- Install the TP-Link Kasa Plugin.
- Configure the TP-Link Kasa Plugin.
- Add TP-Link Kasa Devices to HomeKit.
- Test and Use Your Devices.
After these steps you can control your TP-Link Kasa smart devices using the home app or through “Siri” voice commands on your iOS device. Also, if you want to get more clearly understand about these steps check out How to Add TP-Link to HomeKit Using HOOBS?
HomeBridge
If you’re a tech-savvy person, this is the best solution for you. Home Bridge is a third-party software solution. It offers Apple Home integration for your smart home devices that don’t directly support Apple HomeKit to TP-Link Kasa devices. Also, this is a cost-effective solution.
HomeBridge acts as a bridge between non-HomeKit devices and HomeKit. This is also need to little bit coding knowledge.
Steps to integrate TP-Link to HomeKit using HomeBridge
- Install HomeBridge.
- Install the TP-Link Kasa Plugin.
- Configure the TP-Link Kasa Plugin.
- Add TP-Link Kasa Devices to HomeKit.
If you want to get more understanding about these steps check out How to add TP-Link Kasa to HomeBridge?
Extra configuration options for TP-link Kasa
To set up extra configuration options you can use the Kasa Smart app.
- Download and Install the Kasa Smart App.
- Add Your TP-Link Kasa Devices.
- Access Device Settings.
- Explore Configuration Options.
- Save and Apply Changes.
- Test Your Configuration.
This picture credit goes to AddtoHomeKit
How to Add Kasa Devices to Apple Home App
- Open your Home App, tap + icon and choose ‘Add or Scan Accessory’.
- Now you can either enter the code on your device or scan the QR code and your devices will be added automatically.
- Your devices have been added successfully, you can choose to edit/change the name of your device and choose which room to set it in.
- Afterwards, tap *Next*.
- You can set scenes and afterwards tap *Done*.
- Test your control and enjoy.
TP-Link Kasa Smart Devices
- Kasa KS220: Smart Wi-Fi Light Switch, Dimmer
- Operation Mode — Automatically, Off, Smart Switch
- Current Rating — 2.5 Amps
- Operating Voltage — 110 Volts (AC)
- Connector Type — Screw
- Item dimensions L x W x H — 1.77 x 3.35 x 5.04 inches
- Actuator Type — Push Button
2. Kasa KS200: Smart Wi-Fi Light Switch
- Operation Mode — ON-OFF
- Current Rating — 15 Amps
- Operating Voltage — 120 Volts
- Connector Type — Screw
- Item dimensions L x W x H — 5.06 x 3.33 x 1.41 inches
- Circuit Type — Single Pole
- Actuator Type — Push Button
3. Kasa EP40A: Smart Outdoor Plug
- Amperage — 15 Amps
- Product Dimensions — 1.52 x 3.11 x 4.33 inches
- Usage — Indoor & Outdoor use
Editor’s Pick
Personally, I recommended AddtoHomeKit as the way to go. Because what I like most about AddtoHomeKit is how low on effort and less time-consuming it is. The steps I need to follow are very few and it is less complicated compared to other solutions. But you would consider your preference and go with a desktop solution, app solution or maybe a device solution.
FAQs
- Can Siri control Kasa?
With the Shortcuts App in iOS 12 or above, you can use Siri to control your Tapo/Kasa smart devices — all with just a tap or by asking Siri.
- Do Kasa switches work without internet?
Your connected devices in your local area network (LAN) remain accessible via the Kasa Smart app or other Matter-compatible smart home control centers, even when the household goes offline.
- Can Siri turn on Kasa smart plug?
With the Shortcuts App in iOS 12 or above, you can use Siri to control your Tapo/Kasa smart devices
- Does TP-Link Tapo work with Apple Home?
Fully compatible with Apple HomeKit, Alexa and Google Assistant to enjoy hands-free convenience. The Tapo app contains not only all the features you expect from the TP-Link Tapo family but also guidance for you through each installation step to set up your smart plugs.
- How do I add Kasa camera to HomeKit?
Launch your Home App, tap the + icon and tap ‘Add or Scan Accessory’. 2. Scan the HomeKit QR code or enter the Numeric code on your device. It will add your device automatically.
