How to connect Any Meross Smart Devices to HomeKit
Meross Apple HomeKit integration is honestly a dream which I am going to help you achieve today. Let me elaborate. As you probably know by now, Meross smart home products are not compatible with Apple.
Which is why we need to utilize third-party solutions to bridge the gap between the device and HomeKit. And then you control your Meross devices with Apple Home App. I have compiled a list of the methods I have personally used to help you decide which is the best solution for you!
Let’s get started!
Enomek [Recommended Solution]
Now if you are wondering why I say that Enomek is the most recommended solution to solve all Meross HomeKit issues. Just to give you an explanation, it provides you with thousands of plugins you can use to connect your Meross devices to Apple HomeKit. It provides comprehensive step-by-step guides and allows you to connect your Meross devices to Apple HomeKit.
Step Guide for Enomek App Installation
Enomek is an app solution which provides you with a comprehensive guide to add any smart home device to Apple HomeKit. You must pay a tiny amount when installing the app but in my opinion that price is worth its lifetime service. You can connect any smart home device to Apple HomeKit with Enomek!
Why Chose the Enomek Solution?
Pros
- It has thousands of plugins that you can use.
- Easy installation.
- User-friendly interface.
- Amazing service and compatibility.
- Easy to setup Meross HomeKit.
Cons
- You must make a small payment
Athom Bridge [Budget-friendly Solution]
Athom Bridge is a device solution. As the name already suggests Athom Bridge helps you to avoid incompatibility issues. Athom Bridge is a device that is specifically compiled and is a pre-flashed HomeBridge server. You can use Athom Bridge to connect Meross to iPhone and the Home App allowing you to control Meross away from Home. Not only can you add any Meross smart devices to Apple HomeKit but you can also add any Alexa Device to HomeKit.
Add Athom Bridge to Cart
Why Chose Athom Bridge
Pros
- Very small allowing it to fit with any home decor.
- Affordable
- Allows you to connect your incompatible devices to HomeKit
- Easy operations
Cons
- Depending on where you buy it from, it may take time to arrive at home.
HomeBridge [Software Soltuion]
HomeBridge is a lightweight node JS server. It is free to install to any device and most people including myself opt for a Raspberry Pi to do so. It opens HomeKit to non-compatible devices which allows you to connect your Meross devices to HomeKit.
Why Chose HomeBridge
Pros
- Offers a great solution
- Allows you to connect any device to HomeKit
Cons
- It requires a bit of coding knowledge
- You need an all-day running device like a Raspberyy Pi.
HOOBS
HOOBS (HomeBridge Out of the Box) is an update of HomeBridge. It is a plug and play system. It is very easy to use this solution. They also offer thousands of plugins for each device brand so you can even add any Tuya devices to Apple HomeKit.
Why Chose HOOBS
Pros
- Offer may plugins
- Easy to use
- Does not require coding knowledge
- User-friendly
Cons
- Occasional connection issues
- It serves almost almost the same purpose as HomeBridge but it is expensive.
Meross HomeKit VS Non-HomeKit
How to Set Up Meross Without HomeKit
- Open the Meross App.
- Tap on the + button on the home page.
- Select the device model.
- Select the Non-HomeKit version.
This way you can add your Apple-Compatible products to the Meross app, if you are not too keen on using the Apple Home App.
Meross HomeKit Troubleshooting
If your Meross HomeKit is still not responding, you might have to trouble shoot. A Meross HomeKit troubleshooting is not that difficult. If you are experiencing Meross HomeKit problems or you are unable to connect to Meross to HomeKit, you will have to troubleshoot.
Here are somethings you can do to make sure of proper connectivity;
Ensure Proper Power and Connectivity
Check the Power:
- Make sure your Meross device is properly plugged in and recieving power.
- If it’s a battery-operated device, check the battery levels and replace them if necessary.
Verify Network Connection
- Ensure your Wi-fi network is operational and that the device is within range of the router.
- Restart your router to refresh the network connection.
Reseat the Device
Soft Reset
- Unplug the device from the power source, wait for about 10 seconds, and then plug it back in.
- For battery-operated devices, remove and reinsert the batteries.
Factory Reset
- Refer to the user manual for specific reset instructions for your device.
- Usually, this involves pressing and holding a reset button on the device for a certain period (e.g 5–10 seconds) until the LED indicator blinks.
Update Frimware and App
Firmware Update
- Open the Meross app and check for any available firmware updates for your device.
- Follow the in-app instructions to update the firmware.
App Update
- Ensure you are using the latest version of the Meross app.
- Update the app through your device’s app store if a new version is available.
Reconfigure HomeKit Setup
Remove and Re-Add Device
- Open the Apple Home app and locate the problematic Meross device.
- Tap on the device, then select ‘Remove Accessory’.
- Reset the device (refer to the reset instructions above) and add it back to HomeKit following the standard setup procedure.
Verify Home Hub Status
- Ensure your Home Hub (Apple TV, HomePod or iPad) is online and properly configured.
- Restart the Home Hub if necessary.
Check for Interference and Signal Issues
Minimize Interference
- Move the Meross device away from potential sources of interference such as microwaves, cordless phones or other wireless devices.
- Ensure the device is within a reasonable distance from the Wi-fi router or access point.
Signal Strength
- Use a Wi-fi analyzer app to check the signal strength around the Meross device location.
- Consider moving the router closer or adding a Wi-fi extender to boost the signal.
Editor’s Pick
My pick would be Enomek. To elaborate on that, Enomek is easy and a versatile method of not only adding any Meross device to Apple HomeKit but also in adding any smart home device to Apple HomeKit. While I also loved Athom Bridge it would be good if you have a few days to spare waiting for the delivery, it is okay but still, I recommend Enomek. It is easy and offers a wide variety of smart home brands as well.
FAQs
- Where is the HomeKit code for Meross?
If the setup was successfully done, you will be able to find the HomeKit code on the Meross app product settings page.
2. Is Meross compatible with Apple HomeKit?
Yes, some products are compatible with Apple HomeKit.
3. Is the Meross app free?
Yes! It is completely free. You do not need to make any monthly fees or any other subscription fee.
4. Is Meross compatible with Home Assistant?
Yes! Home Assisstant currently supports all the Meross devices wxposed by the Meross IoT library. Devices such as bulbs, garage door openers, smart thermostates and switches are supported and integrated with Home Assistant.
5. Where is the HomeKit code on Meross?
You have to make sure that your device is the HomeKit version before going ahead with the setup code. If you are an Android user, go to Settings >>HomeKit Setup Code.
If you are an iOS user, you will have to:
- Power up the device and press and hold the power button for 5 seconds to factory reset.
- Keep the device in factory mode for 20 minutes.
- In the Meross app, tap on the “+” button > select smart device > select the Non-Homekit version. (If unavailable select any other device from the list.)
- Once the setup is successful, you will be able to find the HomeKit code on the Meross app product settings page.
- Open the Apple Home app and enter the code and add the device again.
6. Does Meross work with Matter?
Yes! Some products do work with Matter.
