MAX232 | 6203 MOTOR DRIVER | BF245C UHF AMPLIFIER

In this article, we will discuss some of the best available electronics components from the UTSource which can be used for many DIY Projects.

First, we will discuss the MAX232.

Introduction to MAX232

The MAX232 is an integrated circuit first created to converts signal from a TIA-232 (RS-232) serial ports to signal suitable for use in TTL- compatible digital logic circuits. And we will be discussing its various functions below.

MAX 232 is used to convert Transistor-Transistor Logic (TTL) voltage level to RS232 and vice versa, RS 232 is the method of transferring data using serial communication.

Pinout Configuration of the MAX232

The simple pinout diagram for the MAX232 transistor is given below.

Specifications of Operation of MAX232

The various specifications of operation of the MAX232 are listed below

• Operates from a single 5V Power supply with 1.0 uF charge pump capacitors.
• Operates up to 100 kbit/s
• It has two drivers and two receivers.
• It has input levels ranging from -30V to +30V.
• The low supply current is 8mA typical.

Applications of MAX232

The various applications of the MAX232 are listed below

• It is completely TIA/EIA-232-F
• It is run on Battery Powered Systems.
• This component can be used as Terminals.
• It can also be used as a modem.
• It is also used in modern computers also.

Introduction to 6203 Motor Driver

This IC is a full-bridge driver for the motor control applications,

It is also an isolated DMOS Power transistor with CMOS and Bipolar

circuits combined inside the same chip.

Pinout Configuration of the 6203

The simple pinout diagram for the 6203 transistors is given below.

Specifications of Operation of 6203

The various specifications of operation of the 6203 are listed below

• This component has a supply voltage up to 48V
• This has a 5V maximum peak current
• This also provides a cross-connection protection.
• Thermal shutdown feature is also included in this component
• Internal logic supply is another feature.

Features of Operation of 6203

The various features of the 6203 are listed below

• It has an RDS of 300mOhm
• The current output channel is 4A
• It provides a current peak output
• The voltage supply range of this motor driver is 12V to 48 V
• It comes with internal fault protection in case of a higher temperature
• It is operating in mounting type with a hole.

Test circuit diagram of the 6203 Motor driver

Introduction to the BF245C

It is an N-Channel field-effect Transistor

Features of Operation of BF245C

The various features of the BF245C are listed below

• The source and drain can be interchanged as per circuit requirement.
• This component can be used in frequency up to 700MHz

Applications of BF245C

The various applications of the BF245C are listed below

• This device is used as HF, LF and DC Amplifiers.

Pinout Configuration of the BF245C

The simple pinout diagram for the BF245C transistor is given below.

The above picture shows the simple pinout configurations of the BF245C Amplifier.

Test circuit diagram of the BF245C

Conclusion

So we have discussed the various components that can be used in various circuit applications so for buying them at Best price please visit at utsource.net