XcelLab Magazine
Published in

XcelLab Magazine

Hard Fork Vs. Soft Fork

A “fork,” in programming terms, is an open-source code modification. Usually the forked code is similar to the original, but with important modifications, and the two “prongs” comfortably co-exist. Sometimes a fork is used to test a process, but with cryptocurrencies, it is more often used to implement a fundamental change, or to create a new asset with similar (but not equal) characteristics as the original.

Not all forks are intentional. With a widely distributed open-source codebase, a fork can happen accidentally when not all nodes are replicating the same information. Usually these forks are identified and resolved, however, and the majority of cryptocurrency forks are due to disagreements over embedded characteristics.

There are two main types of programming fork: hard and soft.

Hard forks

A hard fork is a change to a protocol that renders older versions invalid. If older versions continue running, they will end up with a different protocol and with different data than the newer version. This can lead to significant confusion and possible error.

With bitcoin, a hard fork would be necessary to change defining parameters such as the block size, the difficulty of the cryptographic puzzle that needs to be solved, limits to additional information that can be added, etc. A change to any of these rules would cause blocks to be accepted by the new protocol but rejected by older versions and could lead to serious problems — possibly even a loss of funds.

For instance, if the block size limit were to be increased from 1MB to 4MB, a 2MB block would be accepted by nodes running the new version, but rejected by nodes running the older version.

Let’s say that this 2MB block is validated by an updated node and added on to the blockchain. What if the next block is validated by a node running an older version of the protocol? It will try to add its block to the blockchain, but it will detect that the latest block is not valid. So, it will ignore that block and attach its new validation to the previous one. Suddenly you have two blockchains, one with both older and newer version blocks, and another with only older version blocks. Which chain grows faster will depend on which nodes get the next blocks validated, and there could end up being additional splits. It is feasible that the two (or more) chains could grow in parallel indefinitely.

This is a hard fork, and it’s potentially messy. It’s also risky, as it’s possible that bitcoins spent in a new block could then be spent again on an old block (since merchants, wallets and users running the previous code would not detect the spending on the new code, which they deem invalid).

The only solution is for one branch to be abandoned in favor of the other, which involves some miners losing out (the transactions themselves would not be lost, they’d just be re-allocated). Or, all nodes would need to switch to the newer version at the same time, which is difficult to achieve in a decentralized, widely spread system.

Soft fork

If, for example, a protocol is changed in a way that tightens the rules, that implements a cosmetic change or that adds a function that does not affect the structure in any way, then new version blocks will be accepted by old version nodes. Not the other way around, though: the newer, “tighter” version would reject old version blocks.

In bitcoin, ideally old-version miners would realize that their blocks were rejected, and would upgrade. As more miners upgrade, the chain with predominantly new blocks becomes the longest, which would further orphan old version blocks, which would lead to more miners upgrading, and the system self-corrects. Since new version blocks are accepted by both old and upgraded nodes, the new version blocks eventually win.

For instance, say the community decided to reduce the block size to 0.5MB from the current limit of 1MB. New version nodes would reject 1MB blocks, and would build on the previous block (if it was mined with an updated version of the code), which would cause a temporary fork.

This is a soft fork, and it’s already happened several times. Initially, Bitcoin didn’t have a block size limit. Introducing the limit of 1MB was done through a soft fork, since the new rule was “stricter” than the old one. The pay-to-script-hash function, which enhances the code without changing the structure, was also successfully added through a soft fork. This type of amendment generally requires only the majority of miners to upgrade, which makes it more feasible and less disruptive.

Soft forks do not carry the double-spend risk that plagues hard forks, since merchants and users running old nodes will read both new and old version blocks.




XcelLab has embarked on an ambitious journey to build an eco-system driven by blockchain technology, and crypto use-cases that are built to address the issues and gaps in the travel, hospitality and retail industry.

Recommended from Medium

Flotilla Protocol AMA Recap with UniqueOne Vietnam

What is DeFi?

Bluzelle and Mintable NFT Partnership

Farming Blockchains, Banks Trade, Supreme Court and Estonian Trusted ICOs, Plus More on News of…

OlympusDAO and PrimeDAO to seed partnership with a Token Swap

Crypto analyst Benjamin Cowen says Cardano growth is because of Smart contract momentum & Bitcoin’s…

Unsolved Problems in Blockchain Sharding

Crypto Daily Digest — May 2nd, 2021

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
XcelToken Exchange

XcelToken Exchange

The Most Trusted Bitcoin, Ethereum & Litecoin crypto exchange II Bitcoin exchange platform II Cryptocurrency trading platform II XcelToken Exchange

More from Medium

Better Angels — Russel

How Princess Diana as a Loving Mother Redefined Royal Motherhood?

Key Cards from Streets of New Capenna for Pioneer

A Love Letter to Bon Iver