Merk WilloughbyACHIEVEMENTSThis post will be an over view some of the key achievements Ive counter. As show on the image above, Currently I’m now able to run clash…1 min read·Oct 27, 2017----
Merk WilloughbyDesign phase 7This design phase enables the user efficiently to detect clashes visually. But after several of discussion, shifting elements may not be…1 min read·Oct 26, 2017----
Merk WilloughbyExtended Thesis AbstractDigital Enhancement for Early Stage Building Information Modelling (BIM) Clash Detection5 min read·Oct 26, 2017----
Merk WilloughbyDesign phase 6This phase counter the problem of detecting clashes when there are more than 1 primary elements in the project, in this case was the wall…1 min read·Oct 26, 2017----
Merk WilloughbyDesign Phase 5This design phase objective is to eliminate the problem of having to access the dynamo script in order to select the category. The new user…1 min read·Oct 26, 2017----
Merk WilloughbyDesign phase 4In this design phase is to address the problems from previous phases. One of those problems was the tedious process of selecting each…2 min read·Oct 26, 2017----
Merk WilloughbyDesign phase 3This design phase was to solve the problems which occur in the earlier stages. In the previous phase, I was not able to shift the elements…1 min read·Oct 26, 2017----
Merk WilloughbyDesign phase 2This phase objective is to shift detected clashes with an certain amount as shown in the diagram above. The aims of this methodology is to…1 min read·Oct 26, 2017----
Merk WilloughbyDesign phase 1Desgign phase 1 aims to collect any clashes that may occur when two elements intersects one another. The whole process has been done via…1 min read·Oct 26, 2017----