Flying Snakes: Aerodynamic Secrets Finally Revealed

Flying snakes can glide at shallow angles for unexpectedly long distances. Now computer simulations of the airflow around them reveal how they do it

In many respects, the Paradise tree snake, Chrysopelea paradise, is unremarkable. It is black and green with clusters of red, orange and yellow scales along its back. It grows to about 3 feet in length and is mildly venomous, although its tiny fangs make it harmless to humans.

Oh, and one other thing: the Paradise tree snake can fly. It is the best known of five species of snake that launch themselves out of trees and glide to the ground. Indeed, the Paradise tree snake is the best flyer of all.

The obvious question is: how does this snake do it? Today, we get an answer thanks to the work of Anush Krishnan at Boston University and a few pals who have simulated for the first time the airflow over the snake’s body as it flies. This has revealed the precise aerodynamic mechanism that the snake exploits.



Let’s start by examining how the snake approaches its aerial task. In ordinary circumstances, the Paradise tree snake has a circular cross section. When it leaps into the unknown, however, it flattens its body forming a kind of triangular cross-section that is flat along the bottom and arched across the top.

It’s not hard to see how this approximates to the cross-section of an ordinary aerofoil. In fact, Krishnan and co says is better described as a lifting bluff body.

The Paradise tree snake begins its glide by launching itself from a tree branch with a small horizontal velocity. It then falls ballistically at an angle of up to 60° from the horizontal.

During this fall, it forms its body into an undulating S-like shape. This ensures that significant parts of its body travel perpendicular to the airflow, like a wing.

Ophiologists (those who study snakes) assume that it is this that creates the snake’s lift and indeed as the snake picks up speed, the trajectory becomes shallower. So the lift must increase.

The Paradise tree snake can end its flight flying at angles as shallow as just 13 degrees. And it can travel significant distances. “In field observations, the snakes cover a horizontal distance of about 10 meters, on average, when jumping from a height of about 9 meters,” say Krishnan and co.

In the last two or three years, ophiologists have become curious about how the snakes perform this trick and have carried out a number of wind tunnel and water flow experiments to find out. These have shown conclusively that the Paradise tree snake’s cross-section does indeed generate lift.

But these experiments have also revealed puzzle. It turns out that the lift peaks when the snake body’s angle of attack is precisely 35 degrees to the incoming airflow. But why this should be the case is not clear.

This is the question that Krishnan and co set out to answer by studying the flow of air using a computer simulation.

These guys created a two-dimensional model in which an aerofoil that matches the cross-section of the Paradise tree snake in-flight could be put through its paces. The advantage of a computer model is that it is possible to vary all kinds of features such as the speed, density and viscosity of the fluid flow (factors that are together known as the Reynolds number). And to study the resulting air flow in detail.

One thing the model did not capture was the three-dimensional shape of the snake. Most experts in this field think that three-dimensional effects become important in this kind of flight, so Krishnan and co had limited expectations for the outcome of their simulation.

So their results were something of a surprise. These guys say they were clearly able to observe the spike in lift. “Significant enhancement in lift appears at an angle of attack of 35 degrees,“ they say.

And because this is a computer simulation they could see exactly how this list was generated. It turns out that at this angle of attack, the smooth flow of air over the snake’s body suddenly becomes more complex. It separates from the surface and forms two pairs of vortices above and behind the snake, one at the top of the triangular arch and one at the trailing edge.



These swirling patterns of air have a dramatically reduced air pressure and it is this that provides the extra lift. The snake is effectively sucked upwards into the area of low pressure.

There was one aspect of the simulation that did not match experimental observations. Krishnan and co say they observed this extra lift at Reynolds numbers of between 2000 and 3000. In experiments, however, the effect appears only at Reynolds numbers of around 9000, a difference they attribute to the two-dimensional nature of their simulation.

That’s an interesting insight into one of the more curious aerodynamic phenomena in nature. At least 30 different types of animal have evolved the ability to glide but the flying snake is the only one to do it without any appendages.

This kind of work may even have an interesting application. In recent years, engineers have become fascinated in copying the way nature solves problems. In particular, robotics engineers have used so-called biomimetics to design robots that are vastly more capable than anything they had been able to make before.

It’s just possible that the flying snake may catch their eye. If so, robotic versions may not be too far away.

Ref: arxiv.org/abs/1309.2969: Lift And Wakes Of Flying Snakes