This is my DIY How-To guide on making your own hookah out of a Patron liquor bottle. Most of the parts/tools except for the hookah bowl and tray can be picked up at a local hardware store like HomeDepot.
For a long time I never had a straight forward configuration for getting MySQL CDR setup on later versions of Asterisk(1.8+). This is to help anyone else that thinks this would be useful and also a reference for me next time I need to do another setup. This should be the…
Asterisk doesn’t have a good setup for low cost routing (LCR) so years ago I borrowed Freeswitch’s mod_lcr with MySQL setup to get multiple vendors in place. This helped to lower cost by picking the lower cost route…
Last month I saw a pic of some awesome looking hookahs made out of liquor bottles. Started checking them out and they looked pretty simple to knock out with parts from Home Depot. I actually had a bunch of stuff from left over test parts on the Bar machine so worked out.
I’ve been seeing posts on hackaday.com over the past month or so about vapor treating ABS prints to give them a nice smooth finish. It looked fairly simple and I had most of the stuff to give it a shot so this was my attempt.
Finally got to knock out a few bottles that I had sitting around. Just been trying to collect larger liquor bottles.
[caption id=”attachment_287" align=”aligncenter” width=”600"]
This was a few months ago but late is better then never!
The bar machine got a set of upgrades recently. Biggest thing is the new skin. Tyler finished up the wood working and looks great. Doors are facing away from the front so it can be serviced without bothering…
Got some time to play with the 3d printer some more. Its working good for small items so decided to print a few brackets for a hacked up laptop to use as a media player in my kitchen.
After months of waiting, I finally got my Printrbot LC from the Kickstarter campaign. It definitely takes a while to build and have to watch tons of YouTube build videos since there wasn’t any written instructions but it’s running. I picked up the power supply enclosure and holds…
Been working back on the UI for the bar machine. Still a bunch of stuff to figure out but got a lot taken care of.
These were the top 10 stories published by cmendes0101; you can also dive into yearly archives: 2010, 2011, 2012, 2013, 2014, and 2018.