LEDE/OpenWRT — Setting Up USB Storage Support

A step by step guide to configuring your LEDE/OpenWRT device to work with USB storage. This guide assumes that you already have a USB formatted for use with your LEDE/OpenWRT device.

SSH to your LEDE/OpenWRT device

LEDE/OpenWRT — TCPDump to Wireshark

Learn how to set up tcpdump on your LEDE/OpenWRT device to communicate with Wireshark, allowing you to view the traffic on your home network.

This post will focus specifically on the steps you need to run on your LEDE/OpenWRT device to drive…

LEDE/OpenWRT — Setting Up CoovaChilli

CoovaChilli is a handy package that allows you to set up a captive portal splash page on your LEDE/OpenWRT device.

This guide assumes you already have a RADIUS set up, or are using a splash page provider, with the details needed.

LEDE/OpenWRT — IP Table Basics

IP tables allow you to explicitly define rules to allow or deny types of traffic.

This guide will walk you through some of the basics to get you started.

SSH to your LEDE/OpenWRT device