One of the latest ASIC manufacturers that is now fully supported on ASIC Hub is the Spondoolies. We currently offer support for the following Spondoolies models:
If you have any other model and want us to add support for it, don’t hesitate to get in touch via live chat on the website or find us on our Discord. If you own other ASICs, the following tutorials might be useful: Antminer monitoring, Innosilicon monitoring, and Baikal monitoring.
Before you start
Before you start, you will have to register a new account on minerstat and add a new worker with type ASIC and the system Spondoolies.
You will also need to know your ASIC’s IP and secure shell (SSH) username and password, which are not the same as the username and password for the web login. Default SSH username/password for Spondoolies machines is usually root/root.
ASIC Hub setup
To set up the ASIC Hub you will need to have a secure shell (SSH) access to your ASIC. Like mentioned above, the SSH access is not the same as web access and also doesn’t use the same default username/password. To establish SSH access you will need special software that allows it - one such free software for Windows is PuTTY. For other systems, you can check Termius.
- Download PuTTY and run it.
- Enter your ASIC’s local IP address, leave the port on 22, and click
Open. - Enter your SSH username.
- Enter your SSH password.
- If your SSH username and password are not correct, you will somehow need to find what are the correct credentials for your Spondoolies ASIC. If
root/rootdoesn’t work, try Googling your Spondoolies' model along with “SSH login” (for example “Spondoolies SPX36 SSH login”). - When you are successfully logged in through the SSH, you can install ASIC Hub.
Enter the following command to install ASIC Hub on your ASIC.
cd /tmp && curl --insecure -H 'Cache-Control: no-cache' -O -s https://raw.githubusercontent.com/minerstat/minerstat-asic-hub/master/install.sh && chmod 777 *.sh && sh install.sh ACCESS_KEY WORKER_NAMEACCESS_KEY needs to be replaced with your minerstat’s access key. You can find it by hovering your mouse over your avatar in the top right corner on your minerstat dashboard.
WORKER_NAME needs to be replaced with your worker’s name.
Please make sure to double check everything as the access key and worker’s name are both case-sensitive.
When you press Enter the script for loading ASIC Hub to your ASIC will be run and after it has successfully finished you will see the output DONE. Within a few minutes, you should see your ASIC online, the configuration will be loaded from the ASIC to the minerstat dashboard and your worker will be successfully mining. If this is not the case, we suggest you check your firmware and make sure that you are using official firmware on your ASIC. After you have upgraded the firmware, you will need to repeat the procedure.
If you have any additional questions, you can find us on Discord or join us on your minerstat dashboard for the live chat.
Happy mining!
—
More from this series:
